D200 gets stuck with ulanzi symbol on screens
Whenever I plug the device in, it starts to update the firmware. But it just gets stuck with an Ulanzi symbol on the screen behind the buttons. And nothing else functions on the device.I've tried with Different Port on my computer and with different cables, But the all end with the same result.
Any Ideas for a possible fix?
I've just noticed that under settings>device it list firmware version 1.7.53 ZeroSeven 发表于 2026-2-6 01:58
I've just noticed that under settings>device it list firmware version 1.7.53
Hello, it appears your firmware upgrade was unsuccessful. I have emailed you instructions on how to upgrade the firmware. Please check your email. Thank you.
Use the RK flashing tool to upgrade the firmware. (Windows only)
Download the attached tools and tutorial from the link below. Please carefully review the precautions in the Word document tutorial and watch the video tutorial for guidance.
Tools and Tutorial:
https://cdn.ulanzistudio.com/sharing/Starting-up_update_2601.zip
Video tutorial link:
https://cdn.ulanzistudio.com/sharing/D200%20RK%20Flash%20for%20Windows.mp4
ZeroSeven 发表于 2026-2-6 01:58
I've just noticed that under settings>device it list firmware version 1.7.53
Hola hermano, tuve el mismo problema y este tutorial me ayudó
Tutorial
页:
[1]