D200 stuck on Starting up
Hello!There is an definive solution for the problem of d200 "starting up" stuck when connected?
Sometimes the device works, then freezes after some time and when I restart it got stuck.. it's annoying.
Hello
According to your description, sometimes the device gets stuck at Starting up when it is turned on, but sometimes it can start normally by re-plugging and unplugging.
A preliminary judgment suggests that it seems a bit like insufficient power supply.
Please verify whether the USB cable is directly connected to the USB port of the computer. If a third-party docking station is used for connection, please confirm that the Deck is directly connected to the USB port of the computer.
If the device is connected to the docking station, if there are too many devices connected to the docking station, it may not be able to handle them. At this time, a charger is needed to supply power to the PD port of the docking station, so that more devices can be driven.
Also, there is a smaller possibility. Please replace the data cable or USB port and check if there might be instability.
我评价这个软件就是垃圾。我只是需要导入键盘。 我的D200出现了一直在starting up界面，进入不了，更换数据线及接口也没有作用，电脑也发现不了硬件了 **Current issues observed:**
1. Black screen on boot.
2. After being idle for a certain period, the device responds very slowly to user input.
3. When operated continuously or when the manager program is launched, the device reboots.
4. No response to user input during operation.
After the update, these issues have made actual use impossible.
Previously, only issue #1 occurred. serch 发表于 2026-1-3 09:18
我的D200出现了一直在starting up界面，进入不了，更换数据线及接口也没有作用，电脑也发现不了硬件了 ...
对于给你带来的不便我们深感歉意！该项属于硬件故障，可以联系客服售后处理哦:loveliness:
页:
[1]